Sie sind nicht angemeldet.

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

1

23.10.2004, 11:28

Fluxbox probleme bei Installations

Ich hab mir Debian nun auf meinem Laptop installiert. Das war soweit kein Problem und alles funktion. Nun wollte ich mir einen Windowmanager installieren (Fluxbox) mit folgendem Befehl: apt-get source fluxbox was allerdings nicht gerade von Erfolg gekrönt war.
Er hat sich die benötigten Dateien aus dem Internet heruntergeladen und dann kam die Fehlermeldung:

dpkg-source: command not found

das gleiche war übrigens auch bei enlightenment, wo ich es ebenfalls versuchte.

was kann ich da machen? bzw. was brauche ich um den Befehl dpkg-source ausführen zu können?

phako

Anfänger

Beiträge: 26

Beruf: Softwareentwickler

  • Nachricht senden

2

23.10.2004, 15:34

RE: Fluxbox probleme bei Installations

Warum willst du Dir die Quellen zu fluxbox runterladen? Das macht apt-get source nämlich. Wenn du das source weglässt, sollte es funktionieren.

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

3

23.10.2004, 16:55

apt-get alleine geht aber gar nicht

apt-get install fluxbox geht aber wie starte ich es dann (startx funktioniert nicht)

phako

Anfänger

Beiträge: 26

Beruf: Softwareentwickler

  • Nachricht senden

4

23.10.2004, 17:03

"funktioniert nicht" ist eine nicht sehr hilfreiche Fehlerbeschreibung!

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

5

23.10.2004, 17:14

command not found ist der genaue fehler

Pharao

2 sexy 4 my Linux

  • »Pharao« ist männlich

Beiträge: 4 214

Wohnort: Hirschhorn / Neckar

Beruf: Schüler

  • Nachricht senden

6

23.10.2004, 18:08

was tippst du ein?
startx ?
close the world - open the next


"funzt" und jegliche Abwandlung davon ist kein Wort, egal wie oft du es dir einredest, verdammt nochmal!

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

7

23.10.2004, 19:07

bei startx kommt ebenfalls command not found

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

8

23.10.2004, 20:54

also ich schreib nochmal genau was ich gemacht habe:

1. Debian netinstall installiert

2. apt-get install fluxbox

3. mkdir ~/.fluxbox

4. vi ~/.xinitrc
Inhalt der Datei:

Quellcode

1
exec /usr/local/bin/fluxbox


5. Rechner neu gestartet

6. "startx ausprobiert" (Fehler: command not found)

7. "exec /usr/local/bin/fluxbox" einfach so eingegeben
Fehler:

Zitat

/usr/local/bin/fluxbox keine Ausführbare Datei



Ich weiß ehrlich gesagt nicht ob da jetzt etwas falsch war. Ich habe mich aber bei den Schritten an die Anleitung auf www.fluxbox.org gehalten.

phako

Anfänger

Beiträge: 26

Beruf: Softwareentwickler

  • Nachricht senden

9

23.10.2004, 21:05

Ja. Wie kommst du auf /usr/local? Bei debian werden die Inhalte der Distributionseigenen Pakete und der der meißten Fremdpakete nach /usr installiert.

Die Anleitung auf www.fluxbox.org bezieht sich auf die Installation aus den Sourcen, Du hast hier aber ein fertig kompiliertes Paket installiert.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »phako« (23.10.2004, 21:06)


CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

10

24.10.2004, 10:42

Nach langem hin und her hab ich jetzt kapiert das bei Debian die verzeichnisse anders sind. Jetzt habe ich alles geändert und auch mit der Sprache de_AT die ja nicht vorhanden hab ich geregelt in dem ich einfach den Ordner de_DE kopiert habe.
Aber wenn ich jetzt sh .xinitrc ausführe kommt die Fehlermeldung
Can not connect to X server.
Make sure you started X before you start fluxbox.

Mir ist schon klar das es jetzt mit dem X Server ein problem gibt bzw. das der vielleicht gar nicht installiert ist aber wie mache ich das ?

Ich habe grade bemerkt das man im Verzeichnis /usr/X11R6/
doch ein Verzeichnis bin haben sollte damit der X server gestartet wird (da sind ja die ganzen drinnen) doch ich hab dieses Verzeichnis nicht.

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »CS-Man« (24.10.2004, 10:51)


phako

Anfänger

Beiträge: 26

Beruf: Softwareentwickler

  • Nachricht senden

11

24.10.2004, 11:33

Vielleicht solltest du Dich erstmal hiermit auseinander setzen: http://www.openoffice.de/linux/buch/x11.html

Auch der Rest von dem Buch ist empfehlenswert.

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

12

27.10.2004, 18:20

Ich hab nun alles installiert und über cf86cfg konfiguriert.
Wenn ich jetzt Fluxbox mit startx installieren will kommt die Fehlermeldung:

(EE)No core pointer device specified
(EE)Unable to determine the screen layout
(EE)Error from xf86 HandleConfigFile()

Fatal server error:
no screens found

Bei den Einstalllungen hab ich für die Maus (MS Funkmaus auf USB) den device /dev/usb/mouse0 gewählt. Die anderen Sachen wie Bildschirm und Karte habe ich nach der Beschreibung ausgewählt.

phako

Anfänger

Beiträge: 26

Beruf: Softwareentwickler

  • Nachricht senden

13

27.10.2004, 18:32

Schau mal nach, ob in dem Abschnitt, in dem die Maus konfiguriert ist (in /etc/X11/XF86Config-4) die Zeile

Option "CorePointer"

auftaucht.

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

14

29.10.2004, 17:42

nein ist nicht dabei

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

15

30.10.2004, 18:54

ich hab bei google ein bisschen nach meinem Problem gesucht und da bin auf jemanden gestoßen der einfach seine aktuelle XF86Config-4 durch die XF86Config-4 von einem Knoppix (das man natürlich zuerst bootet) ersetzt hat und somit das Problem löste.
Leider brachte das bei mir aber auch keine Veränderungen, die selben Fehler werden noch immer angezeigt.
»CS-Man« hat folgende Datei angehängt:

CS-Man

Anfänger

  • »CS-Man« ist männlich
  • »CS-Man« ist der Autor dieses Themas

Beiträge: 10

Wohnort: Österreich

Beruf: Schüler

  • Nachricht senden

16

30.10.2004, 19:44

Hier noch die XF86Config-4 von Knoppix:

Quellcode

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
Section "ServerLayout"
	Identifier     "XFree86 Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
	Option "AllowMouseOpenFail"  "true"
	
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
	FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
	FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
#	FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi"
#	FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
	FontPath     "/usr/share/fonts/ttf/western"
	FontPath     "/usr/share/fonts/ttf/decoratives"
	FontPath     "/usr/share/fonts/truetype"
	FontPath     "/usr/share/fonts/truetype/openoffice"
	FontPath     "/usr/share/fonts/truetype/ttf-bitstream-vera"
	FontPath     "/usr/share/fonts/latex-ttf-fonts"
	FontPath     "/usr/X11R6/lib/X11/fonts/defoma/CID"
	FontPath     "/usr/X11R6/lib/X11/fonts/defoma/TrueType"
EndSection

Section "Module"
        Load  "ddc"  # ddc probing of monitor
	Load  "GLcore"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
        Load  "bitmap" # bitmap-fonts
	Load  "speedo"
	Load  "type1"
	Load  "freetype"
	Load  "record"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "keyboard"
        Option      "CoreKeyboard"
	Option "XkbRules" "xfree86"
	Option "XkbModel" "pc105"
	Option "XkbLayout" "de"
	Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
	Identifier  "Serial Mouse"
	Driver      "mouse"
	Option      "Protocol" "Microsoft"
	Option      "Device" "/dev/ttyS0"
	Option      "Emulate3Buttons" "true"
	Option      "Emulate3Timeout" "70"
	Option	    "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
	Identifier  "PS/2 Mouse"
	Driver      "mouse"
	Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
	Option      "Device" "/dev/psaux"
	Option      "Emulate3Buttons" "true"
	Option      "Emulate3Timeout" "70"
	Option	    "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
	Option		"SendCoreEvents"	"true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
	Identifier	"Monitor0"
	Option	"DPMS"	"true"
#	HorizSync    28.0 - 78.0 # Warning: This may fry very old Monitors
	HorizSync    28.0 - 96.0 # Warning: This may fry old Monitors
	VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
#	VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
	#  Default modes distilled from
	#      "VESA and Industry Standards and Guide for Computer Display Monitor
	#       Timing", version 1.0, revision 0.8, adopted September 17, 1998.
	#  $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
	# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
	ModeLine "640x350"    31.5  640  672  736  832    350  382  385  445 +hsync -vsync
	# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
	ModeLine "640x400"    31.5  640  672  736  832    400  401  404  445 -hsync +vsync
	# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
	ModeLine "720x400"    35.5  720  756  828  936    400  401  404  446 -hsync +vsync
	# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
	ModeLine "640x480"    25.2  640  656  752  800    480  490  492  525 -hsync -vsync
	# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
	ModeLine "640x480"    31.5  640  664  704  832    480  489  491  520 -hsync -vsync
	# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
	ModeLine "640x480"    31.5  640  656  720  840    480  481  484  500 -hsync -vsync
	# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
	ModeLine "640x480"    36.0  640  696  752  832    480  481  484  509 -hsync -vsync
	# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
	ModeLine "800x600"    36.0  800  824  896 1024    600  601  603  625 +hsync +vsync
	# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
	ModeLine "800x600"    40.0  800  840  968 1056    600  601  605  628 +hsync +vsync
	# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
	ModeLine "800x600"    50.0  800  856  976 1040    600  637  643  666 +hsync +vsync
	# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
	ModeLine "800x600"    49.5  800  816  896 1056    600  601  604  625 +hsync +vsync
	# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
	ModeLine "800x600"    56.3  800  832  896 1048    600  601  604  631 +hsync +vsync
	# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
	ModeLine "1024x768"   44.9 1024 1032 1208 1264    768  768  776  817 +hsync +vsync Interlace
	# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
	ModeLine "1024x768"   65.0 1024 1048 1184 1344    768  771  777  806 -hsync -vsync
	# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
	ModeLine "1024x768"   75.0 1024 1048 1184 1328    768  771  777  806 -hsync -vsync
	# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
	ModeLine "1024x768"   78.8 1024 1040 1136 1312    768  769  772  800 +hsync +vsync
	# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
	ModeLine "1024x768"   94.5 1024 1072 1168 1376    768  769  772  808 +hsync +vsync
	# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
	ModeLine "1152x864"  108.0 1152 1216 1344 1600    864  865  868  900 +hsync +vsync
	# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
	ModeLine "1280x960"  108.0 1280 1376 1488 1800    960  961  964 1000 +hsync +vsync
	# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
	ModeLine "1280x960"  148.5 1280 1344 1504 1728    960  961  964 1011 +hsync +vsync
	# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
	ModeLine "1280x1024" 108.0 1280 1328 1440 1688   1024 1025 1028 1066 +hsync +vsync
	# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
	ModeLine "1280x1024" 135.0 1280 1296 1440 1688   1024 1025 1028 1066 +hsync +vsync
	# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
	ModeLine "1280x1024" 157.5 1280 1344 1504 1728   1024 1025 1028 1072 +hsync +vsync
	# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
	ModeLine "1600x1200" 162.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
	ModeLine "1600x1200" 175.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
	ModeLine "1600x1200" 189.0 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
	ModeLine "1600x1200" 202.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
	ModeLine "1600x1200" 229.5 1600 1664 1856 2160   1200 1201 1204 1250 +hsync +vsync
	# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
	ModeLine "1792x1344" 204.8 1792 1920 2120 2448   1344 1345 1348 1394 -hsync +vsync
	# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
	ModeLine "1792x1344" 261.0 1792 1888 2104 2456   1344 1345 1348 1417 -hsync +vsync
	# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
	ModeLine "1856x1392" 218.3 1856 1952 2176 2528   1392 1393 1396 1439 -hsync +vsync
	# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
	ModeLine "1856x1392" 288.0 1856 1984 2208 2560   1392 1393 1396 1500 -hsync +vsync
	# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
	ModeLine "1920x1440" 234.0 1920 2048 2256 2600   1440 1441 1444 1500 -hsync +vsync
	# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
	ModeLine "1920x1440" 297.0 1920 2064 2288 2640   1440 1441 1444 1500 -hsync +vsync
	# Additional modelines
	ModeLine "1800x1440"  230    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
	ModeLine "1800x1440"  250    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
	# Extended modelines with GTF timings
	# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
	ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
	# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
	ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
	# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
	ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
	# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
	ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
	# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
	ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
	# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
	ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
	# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
	ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
	# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
	ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
	# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
	ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
	# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
	ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
	# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
	ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
	# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
	ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
	# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
	ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
	# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
	ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
	# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
	ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
	# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
	ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
	# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
	ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
	# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
	ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
	# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
	ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
	# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
	ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
	# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
	ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
EndSection

Section "Device"
	### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
        #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
	Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
	Driver      "vesa"
	VendorName  "All"
	BoardName   "All"
#	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultColorDepth 16
	SubSection "Display"
		Depth     1
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     32
		Modes "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "DRI"
	Mode 0666
EndSection

Thema bewerten