Ja hab ich aber nur short (kurz) aber werde dann mal um mitternacht ne lange version machen.
Achja sorry, wenn ich den Arbeitsgang im Vorrigen post nicht ganz genau beshrieben habe.
Jedenfalls hier mal ein auszug aus smartctl -a (laufwerk)
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is
http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: IBM Deskstar 60GXP series
Device Model: IC35L040AVER07-0
Serial Number: SXPTX2E8137
Firmware Version: ER4OA46A
User Capacity: 41,174,138,880 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1
Local Time is: Sat Jan 5 16:37:55 2008 CET
==> WARNING: IBM Deskstar 60GXP drives may need upgraded SMART firmware.
Please see
http://www.geocities.com/dtla_update/index.html#rel and
http://www-3.ibm.com/pc/support/site.wss…ocid=MIGR-42215 or
http://www-1.ibm.com/support/docview.wss?uid=psg1MIGR-42215
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (1383) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 23) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 050 Pre-fail Offline - 315
3 Spin_Up_Time 0x0007 127 127 024 Pre-fail Always - 162 (Average 182)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 545
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 136 136 020 Pre-fail Offline - 31
9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 21012
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 545
192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 545
193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 545
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 35 (Lifetime Min/Max 15/49)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 21011 -
Device does not support Selective Self Tests/Logging
Nun ja, is ja auch wieder die alte Platte
.
Muss danach schauen auf einem anderen Recher ob die neue defekt ist oder nur so eine erscheinung war.
Bis jetzt läuft er noch ohne Fehlermeldung !!
Naja, also hab ich mit dem ext3 nen guten schnitt
.
Jetzt dennoch ne Frage wo stehen denn die User mit der ID bei Debian.
Damit ich bei der nächsten neu installation nicht die ganzen User hinzufügen muss !!